Installing vinyl siding over wood siding is a great way to change the look of your home. However, there are some precautions that you need to take. You must ensure that your siding is weather-resistant. You will need to install a moisture barrier. This can be done with a polyethylene sheet. The next step is sealing the seams of your moisture barrier with vapor barriers tape. The final step involves nailing the moisture barrier into furring strips to hold the siding in position.
Once you've inspected the condition of your siding, you'll need to adjust some of the doors and windows in your house. For example, if you have casement windows, the new thickness of your walls may require that the frames be enlarged. You will need to remove trim from windows that are set in slightly.
Wood siding should be removed if it has any decay, mold, or rot. You'll also need to replace it with fresh boards. A contractor can be hired to fix siding damage. If the problem you are having is not structural, you may leave it alone.
Before you begin the process, you'll need to find out how much wood sheathing is already attached to your house. The ideal is to remove at minimum a couple inches of this wood. A measuring tape is useful to determine the length or width of the sheathing. The siding panels must be able to be laid on the flat surface. You can also use rigid foam to protect any cracks in the walls.
You'll need to remove any old trim, windows, and doors before you can start to install vinyl siding over your existing wood siding. You'll also need to work around your house so that rows are level. This makes it easier to align siding panels at corners.
Installing vinyl siding panels will require a starter strip. This is usually a vertical strip of lumber, and it should be installed about an inch above the wood siding on each side. Typically, it's recommended that you install the strip with a 16-inch interval. Attach a starter section to your wall using nails placed in the middle. Place the nails in the slot at the center. Leave 1/4 inch space at the ends.
Vinyl siding can be installed over wood siding. However, it is important to not damage the sheathing. Talk to a professional who is experienced in installing vinyl siding. Also, be aware of potential issues with outdoor light fixtures, gutters and other problems.
FAQ
What order should renovations of the home be performed?
It is important to determine where you want to place everything when renovating your house. If you're planning on selling your home soon, it is important to consider how you wish to present your home for potential buyers. The design of your kitchen and living room should be considered. Once you have decided which rooms you want to renovate, you should start looking for contractors who specialize in those areas. Once you have hired a contractor you can begin work on your renovation project.
Can I rent a dumpster?
You can rent a dumpster for debris removal after your home renovation. Renting a dumpster to dispose of your trash is a great option.
How can I prevent being scammed when renovating my house
Knowing what you're paying for is the best way to avoid being scammed. Read the fine print before signing any contract. Also, don't sign blank contracts. Always ask for a copy of the signed contract.
How many times should I change my furnace's filter?
This depends on how often your family will use their home heating system. Consider changing your filter frequently if your family plans to leave the house during cold weather months. If you're not often out of your home, however, you may be more able to wait for the filter to change.
A furnace filter can last about three months. You should replace your furnace filters every three months.
For information on when to replace your filter, you can consult the manufacturer. Manufacturers recommend changing your filter after each heating season. Other manufacturers suggest waiting until visible dirt builds up.
How Much Does It Cost to Renovate A House
The cost of renovations depends on what material is used, the size of project and how complicated the job is. Some materials, like wood, need special tools like saws and drilling while others, like steel require no additional tools. The price of renovations will depend on whether you need your contractor to do everything or if the work is done by you.
The average cost for home improvements projects is $1,000 to $10,000. The total cost for a home renovation project would be $5,000 to $25,000 if you hire professionals. The total cost of hiring professionals could be anywhere from $5,000 to $25,000. If you choose to complete the task yourself, it could run up to $100,000.
You should know that there are many factors which determine the final cost of renovation. The type of material used (e.g. brick vs concrete), the size of the project, the number of workers involved, the length of the project, etc. These are important considerations to remember when estimating total renovation cost.
Do I need to hire an architect?
If you are planning to renovate your own home, it may be easier to just hire someone else to do the work for you. However, if you are planning to buy a new home, then hiring an architect or builder will help you make sure that you get exactly what you want.
Statistics
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
External Links
How To
How do I plan a whole-house remodel?
It takes careful planning and research to plan a complete house remodel. Before you even start your project there are many important things that you need to take into consideration. First, you must decide what type of home improvement you want. There are several categories you can choose from, such as bathroom, kitchen, bedroom, living area, and so on. Once you've chosen the category you want, you need to decide how much money to put towards your project. It's best to budget at least $5,000 per room if you don't have any experience working on homes. You might be able get away with less if you have previous experience.
Once you have established how much you are able to afford, you will have to decide on how big a job to do. You won't be capable of adding a new floor, installing a countertop, or painting the walls if your budget is limited to a small remodel. On the other hand, if you have enough money for a full kitchen renovation, you can probably handle just about anything.
The next step is to find a contractor who specializes in the type of project you want to take on. This way, you'll be guaranteed quality results and you'll save yourself a lot of headaches later on down the road. You should begin gathering materials and supplies after you've found a competent contractor. You may need to purchase everything from scratch depending on the size and scope of your project. However, you won't have to worry about finding the exact item you are looking for in the many pre-made shops.
Once you've collected all the materials you will need, you can begin to plan. First, you'll want to draw up a rough sketch of where you want to place furniture and appliances. Then you will design the layout. Remember to leave enough space for outlets and plumbing. It is a good idea to place the most important areas nearest the front door. This will make it easier for visitors to access them. Last, choose the colors and finishes that you want to finish your design. In order to avoid spending too much money, stick to neutral tones and simple designs.
Once you have completed your plan, it is time to begin building. Before you start building, check your local codes. Some cities require permits. Other cities allow homeowners without permits. You will need to first remove all walls and floors that are not required for construction. The next step is to lay plywood sheets on your new flooring. You will then attach or nail pieces of wood together to make the cabinet frame. Finally, attach doors to the frame.
There are some final touches that you will need to make after you are done. You might want to cover exposed pipes or wires. You will need to use tape and plastic sheeting for this purpose. Also, you will need to hang mirrors or pictures. Keep your work area tidy and clean at all times.
These steps will help you create a functional, beautiful home that is both functional and attractive. You now have the knowledge to plan a complete house remodel.